Tuesday, March 5, 2013

Balloon motorcycle

CC0


Dailymotion:
Materials: a balloon and an air pump.


Inflate a balloon leaving a six—inch flat tail (Pic 1).

The first bubble you twist to make the front wheel. Twist the first soft four—inch bubble (Pic 2).

Lock both ends of the first bubble in one lock twist (Pic 3). This step is marked with arrows between point A and B on the scheme.

Twist the second soft one—inch bubble (Pic 4).

Lock both ends of the second bubble in one lock twist (Pic 5). This step is marked with arrows between points B and C on the scheme.

Force and fix the second bubble in the loop of the first bubble (Pic 6).You have made the front wheel.

Twist the third one—inch bubble (Pic 7).

The next five bubbles you twist to make the handlebar. Twist the fourth one—inch bubble (Pic 8).

Twist the fifth soft one—inch bubble (Pic 9).

Twist the six one—inch bubble (Pic 10).

Twist the seventh soft one—inch bubble (Pic 11).

Twist the 8th one—inch bubble (Pic 12).

Lock both ends of the chain of the last five bubbles in one lock twist (Pic 13). This step is marked with arrows between point I and D on the scheme.

Lock both ends of the fifth bubble in one lock twist (Pic 14). This step is marked with arrows between point E and F on the scheme.

Lock both ends of the seventh bubble in one lock twist (Pic 15 and 16). This step is marked with arrows between point G and H on the scheme. You have made the handlebar.


Twist the ninth three—inch bubble (Pic 17).

Twist the 10th soft one—inch bubble (Pic 18).

Lock both ends of the tenth bubble in one lock twist (Pic 19). This step is marked with arrows between point J and K on the scheme.

Twist the 11th two—inch bubble (Pic 20).

The next bubble you twist to make the rear wheel. Twist the twelfth soft five—inch bubble (Pic 21).

Lock both ends of the twelfth bubble in one lock twist (Pic 22). This step is marked with arrows between point L and M on the scheme.

Twist the thirteenth soft two—inch bubble (Pic 23).

Lock both ends of the thirteenth bubble in one lock twist (Pic 24). This step is marked with arrows between point M and N on the scheme.

Force and fix the thirteenth bubble in the loop of the twelfth bubble (Pic 25). You have made the rear wheel.

The next bubble you twist to make the sit. Twist the fourteenth soft two—inch bubble (Pic 26).

Lock both ends of the fourteenth bubble in one lock twist (Pic 27). This step is marked with arrows between point N and O on the scheme.

Fix all bubbles in proper positions (Pic 28 and 30). Congratulations, you have made the bike. Have fun and happy twisting :)


So far you spent on this page.

www.fewdoit.com
for you

No comments:

Post a Comment